Do you know How to remove tape from wall without peeling paint or without damaging your wall? We use tape on the walls at different times and for different needs. But the main problem arises when you want to remove it from your wall. Since tape has adhesive, it can peel paint from your wall. So, how to remove it without peeling paint?
You can remove any tape from a wall without peeling or damaging paint in different ways. You can melt the adhesive of tape by using a hair dryer or iron and then pull it off. You can also use packaging tape to remove the both-sided tape from the wall. Or, as the final solution, you can remove it by scraping.
It might be challenging to take tape off a painted wall. An incorrect technique might result in you removing the paint from your wall. Here I’ll describe how to remove tape from a painted wall without peeling paint. So, let’s get started.
How to remove tape from wall without peeling paint?
There are several techniques to remove any tape off a wall without peeling or damaging paint. The best method to remove tape depends on tape type and adhesive’s tenacity as well. Let’s take a look at different methods to remove tape from walls.
Method-01: Use packaging tape to remove
You can use single-sided tape to Remove double-sided Tape from Wall. It is a simple yet effective method to remove double-sided tape from any surface without damaging the surface. So, let’s explore how to remove double-sided tapes from a painted wall using this method.
Step-01: Cover and Pull
Place your packaging tape over on the both-sided tape on your wall. Cover the tape on the wall with packaging tape in such a way that the packaging tape does not come into contact with the wall. Now pull the packaging tape with light pressure. The double-sided tape on your wall should take off with packaging tape. If not then follow further steps.
Step-02: Place and drag
Now hold the piece of tape you have firmly and place it on top of the tape on your wall and drag it. After pulling like this a few times, you will see the tape sticking to the wall coming off. So, continue dragging until the entire tape is removed from your wall.
Method-02: Remove tape using Heat method
Utilizing heat is another effective way to remove tapes from walls without damaging wall paints. This method removes single-sided and both-sided tape from a wall without leaving many adhesive stains. So, let’s dig out How to remove tape from wall without peeling paint using this heating method.
Step-01: Get a Hair-dryer or Iron
Heat can efficiently melt stubborn adhesives of tape without harming wall paint. However, you should heat up with light heat. A hair dryer or iron is the way to go through this situation. So, get a hair dryer or iron and then plugin it into a power socket.
Step-02: Heat Up the Tape
Hold your hair dryer a few inches from the tape and heat it up. Or, if you are going to use iron, place a cloth or tissue over the tape and apply iron over this cloth or tissue.
Step-03: Peel tape’s corner
Set your hair dryer/iron aside for a little while, then try to peel at one of the tape’s corners with your fingernail. The tape should come off from your wall. After this, if any remaining part of the tape remains on the wall, reheat it and remove it in the same manner.
Method-03: Remove tape using a Scraper
If none of the above two methods work, then the only solution is to use a scrapper. Yes! You can remove the tape from a wall using a scrapper. So, how can you remove tape using a scrapper from a wall?
Step-01: Get a scraper or scraper-like tool
To remove tapes by scrapping method, you first need a scraper or scraper-like tool. So, get a scrapper from your nearest hardware shop. You might also use a scraper-like object or a knife.
Step-02: Heat up the Scraper
We already said that heat helps to melt stubborn adhesives and remove the tape easily. So, heating up the scraper is a wise decision. You can also start without heating it.
Step-03: Scrap the tape
Now you should start scraping the tape. Start from a corner and gently scrap the tape because it can damage or peel your wall’s paint if you put excessive pressure. Scrap until the whole tape is removed from your wall.
Important notice
You can easily remove any tape from your wall with the above methods. But in this case, the adhesive of the tape may remain on the wall. Removing the tape, especially by scraping method, will leave the adhesive on your wall. So now you have to take the necessary steps to remove this glue.
How to remove adhesive stains of tape from wall
After removing tape from wall, now it is time to eliminate the remaining adhesive stains from your wall. There are several ways you can do this task. So, how to remove adhesive stains from walls?
Method-01: Remove adhesive stains using rubbing alcohol
Rubbing alcohol is one of the most and safest solutions to remove adhesive stains from any surface. This chemical compound does not harm or damage paints. The most effective percentage is a higher one, like 90%; however, for a painted wall, you should use a lower one, like 70%.
Step-01: Apply rubbing alcohol
There are two ways to apply rubbing alcohol to your wall. You can either apply it using a clean cloth or you can apply it using a spray bottle. Ensure that you soak all areas affected with adhesive stains. Now, wait at least one minute to break the adhesive’s bond.
Step-02: Scrab with Cloth
After one or more minutes, now scrape those areas using a cloth. Now you might see those adhesive stains coming off your wall.
Method-02: Remove adhesive stains using oil
Oil effectively eliminates adhesive stains from any surface, like walls or floors. You can use any oil, including olive oil, coconut oil, or cleaning oil like Goo Gone Adhesive Residue remover oil, to eliminate adhesive from your wall surface.
Step-01: Apply oil to the adhesive area
Take a clean cloth or a cotton ball and soak it with oil. Now wet the adhesive area with this wet cloth or cotton bar. Ensure that you soak all the adhesive-affected areas properly with oil. Now leave it for some moment in order to break the adhesive’s bond.
Step-02: Rub gently with a soft cloth
Come back after some time and rub the area gently with a soft dry cloth. Now you will see the adhesive stains disappearing from your wall.
Method-03: Clean with Vinegar
You may use Vinegar, an organic, non-toxic solvent, to clean any surfaces around your home. It is an effective solution to remove adhesive stains from a wall. So, how to remove adhesive stains using Vinegar?
Step-01: Prepare Vinegar Solution
Take a clean cup and pour it with warm water. Now put ¼ cup of Vinegar into the cup as well as put some dishwashing detergent into it. Mix them thoroughly.
Step-02: Soak and Rub
The afflicted region should be gently rubbed in circular motions using a soft cloth or paper towel that has been dipped in the mixture. Continue doing this until all residue is gone.
